Ningbo Ruiguang Electrical Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Chen Anlar
  • Company Name : Ningbo Ruiguang Electrical Co., Ltd.
  • Tel : 86-0574-25758810
  • Fax : 86-0574-25757715
  • Address : Zhejiang,Ningbo,No 21,Jincheng Road,Binhai Industrial Zone,Xiangshan,Ningbo
  • Country/Region : China
  • Zip : 315174

solar string light

solar string light
Product Detailed
Look!The solar string light is very beautiful and usefull.It is environmental.Solar light must be installed in a sunny location

Solar light must be installed in a sunny location where it can receive maximum sunlight during daytime hours. Any cover that shades the solar panel will affect its ability to absorb sunlight and decrease the amount of brightness and duration of the LED lights and its function will be decreased. The selected location should not be near a nighttime light source such as a porch light, street light, etc as these lights might prevent the solar rope light from automatically turning on. The electronic box can be positioned in the ground with the tube ad pointed stake or on a flat surface with the wall mounting bracket. Always place the tube or wall mounting bracket first, then attach the electronic box. Be sure the solar panel is pointed toward the light. Operation Charge battery for at least 8 hours before first use. Turn power switch to the ON position and the selection switch to the AUTO position when first activated. NOTE : THE UNIT WILL NOT FUNCTION IF << MODE >> IS SELECTED WHEN FIRST ACTIVATED. a. AUTOTurning selection switch to the AUTO position will cycle the lights through seven different flashing sequences : 1. Steady on, 2. Fast twinkling, 3. Slow twinkling, 4. Slow flashing in series, 5. Slow flashing in reverse series, 6. Fast flashing in series, 7. Slow flashing in series followed by reverse series. Each sequence will last for approximately 10 seconds. b. MODEThe user can select any of the above sequence for constant use. While in the AUTO position, turn the select switch to the MODE position when the desired sequence is illuminated. The light will continue to operate in the selected mode until the unit is either turned off or another sequence is chosen. Battery changing If your lights should begin to illuminate dimly or for shorter durations of time, you should replace the rechargeble batteries in the following way : 1. Unscrew 4 screws and remove bottom plate from the electronic box, 2. Replace the old batteries with new one. ing : 1. Be sure that battery polarity and voltage are correct (wrong polarity is dangerous), 2. Do not dispose of old batteries, they should be recycled.

solar string light



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.